Polishing Film--Hancent(Shenzhen) Limited--Fiber Optical Patchcord Coupler PLC WDM SFP XFP

Type	FOS-01 (For high pressure polisher)
Standard Size	Disk type : 105mm dia. (100pcs/set) 127mm dia. (100pcs/set) Role type : 140mm (W) × 20m (L) -Any style is available
Backing Thickness	75µm (3mil)
Applicable Ferrule	1.25mm dia. zirconia ferrule 2.5mm dia. zirconia ferrule
Storage conditions	Temperature : 10 ~ 30 °C Humidity : 30 ~ 60%RH

POLISH: (PRIMARY CLEANING)
Soon after polishing, disconnect the ferrules from the jig and wash them with a sufficient quantity of pure water.: (SIDE FACE CLEANING)
Wipe the water droplet off the ferrules side face with a dry KIMWIPES or suitable others.: (SECONDARY CLEANING)
Place a piece of cleaning cloth (^*REF.), which is folded into" four" and fully damped with ethanol. Rub the end face against the cleaning cloth piece-by-piece to clean itself.
< PRACTICAL INDICATION > with the pressure of 200g weight, the distance of 2cm, as many as three times for 2.5mm dia. Ferrules.: (FINAL CLEANING)
Finally, clean the ferrule end-face by NTT-ME CLETOP Reel type.

(^*REF.) Recommended cleaning cloth :

TechniCloth® TX ®609 9 " x 9" made by TEXWIPE®.

*	TechniCloth® and TX®609 are the registered trademarks of The Texwipe Company.

* PRECAUTION
DO NOT WIPE the ferrules with a dry cloth immediately after polishing, without secondary cleaning.
If the end face, where liquid polishing component still remains, is wiped with a dry cloth , attachments might adhere on it. It is difficult to remove.

Features

Specification

Ferrule Cleaning Method after polishing by FOS film