Revolutionary Cleaning System for Fiber Optic Connectors
Dirt is the number one source of troubleshooting in optical networks today. Westover Scientific's patented CleanBlast™ fiber end-face cleaning systems provide a fast, cost-effective solution for removing loose dirt and debris from connectors at every stage of life. When used prior to each mating, the cleaning effectiveness is nearly 100%.
Westover CleanBlast utilizes a highly filtered stream of pressurized gas in conjunction with a vacuum circuit to create a high flow rate jet across the surface of the fiber. Once established, 30 micro liters of cleaning solvent are injected into the flow. The solvent, along with the contamination removed from the end-face, are then removed through the retrieval circuit. The entire process takes less than one second.
A complete system requires a base unit and a cleaning tip suitable for the connector being cleaned. Cleaning tips are available for both male and female connectors. Bench systems require 50-250 psi of external compressed air or nitrogen.
All systems include an input port for a probe microscope, as well as a video output that can be connected to an external monitor or to a mounted LCD. “Digital” cleaning machines feature an additional output to a USB port so the image can be brought to a PC for documentation or display.
The system’s solvent reservoir holds enough for approximately 8,000 cleaning cycles. The refill process is simple and spill-resistant.
A built-in safety prevents the handset from actuating the cleaning cycle unless it is depressed, protecting against accidental solvent discharge. The system monitors solvent levels and the safety switch, and provides a series of LED’s on the front panel to indicate system status.
|
Power Req. |
Weight |
Air Source |
Cycle Time |
Cost/Clean |
|
100-250VAC, 2Amp. |
12 lbs. (5.4 kg.) |
External |
0.8 Seconds |
< $0.01 US |
Order Information:
|
Part |
Description |
|
FCL-B1000 |
CleanBlast: Bench-top, Analog, Bulkhead Handset Univ. 2.5mm Tip |
|
FCL-B1000-22 |
CleanBlast: Bench-top, Analog, Bulkhead Handset 22' Umbilical Univ. 2.5mm Tip |
|
FCL-B1000-EU |
CleanBlast: Bench-top, Analog, Bulkhead Handset, EU Univ. 2.5mm Tip |
|
FCL-B1000-UK |
CleanBlast: Bench-top, Analog, Bulkhead Handset, UK Univ. 2.5mm Tip |
|
FCL-B1100 |
CleanBlast: Bench-top, Digital Bulkhead Handset Univ. 2.5mm Tip |
|
FCL-B1100-EU |
CleanBlast: Bench-top, Digital Bulkhead Handset, EU Univ. 2.5mm Tip |
|
FCL-B1100-UK |
CleanBlast: Bench-top, Digital Bulkhead Handset, UK Univ. 2.5mm Tip |
|
FCL-B2000 |
CleanBlast: Bench-top, Analog, 90° Handset Univ. 2.5mm Tip |
|
FCL-B2000-22 |
CleanBlast: Bench-top, Analog, 90° Handset, 22' Umbilical Univ. 2.5mm Tip |
|
FCL-B2100 |
CleanBlast: Bench-top, Digital 90° Handset Univ 2.5mm Tip |
|
FCL-B2100-EU |
CleanBlast: Bench-top, Digital 90° Handset, EU, Univ 2.5mm Tip |
|
FCL-B3000 |
CleanBlast: Bench-top, Analog, Dual - Bulkhead and Patch Cord Univ. 2.5mm Tip & Adapter |
|
FCL-B4000 |
CleanBlast: Bench-top, Analog, Patch Cord Module Univ. 2.5mm Adapter |
|
FCL-B4000-EU |
CleanBlast: Bench-top, Analog, Patch Cord Module, EU Univ. 2.5mm Adapter |
|
FCL-B4100 |
CleanBlast: Bench-top, Digital Patch Cord Module 2.5mm Adapter |
|
FCL-B4100-EU |
CleanBlast: Bench-top, Digital Patch Cord Module, EU Univ. 2.5mm Adapter |
|
FCL-B5000 |
CleanBlast: Bench-top, Analog, Transceiver Module, FBP-P5 |
|
FCL-B5100 |
CleanBlast: Bench-top, Digital Transceiver Module, FBP-P505 |
|
FCL-B5100-EU |
CleanBlast: Bench-top, Digital Transceiver Module, FBP-P505, EU Power Supply |
|
FCL-B6000 |
CleanBlast: Benchtop, Backplane Cleaning Wand |
|
FCL-B6100 |
CleanBlast: Benchtop, Digital, Backplane Cleaning Wand |
|
FCL-LMCO2 |
Benchtop Cleaning & Inspection Kit, for 38999 Type Connectors FCL-B2000, LCD, Probe, Tips |
|
产品分类 | 关于我们 | 联系我们 | 收藏本站 |
